User's Guide

WAVE
Wide Area Voice Environment (WAVE
™
) provides a new
method of making calls between two radios.
This feature also supports calls between radios and other
devices with WAVE capabilities. However, a WAVE
channel must be set up to use this feature.
When in a WAVE channel, the radio is unable to receive
calls from other systems and can only receive WAVE calls.
If the radio is in a WAVE channel, the radio enables Wi-Fi
automatically and proceeds to log into the WAVE server.
WAVE calls are made when the radio is connected to an IP
network through Wi-Fi.
NOTICE:
This feature is applicable to XPR 5550e/XPR 5580e
only.
Table 1: WAVE Display Icons
The following icons appear momentarily on the display
when WAVE is enabled.
WAVE Connected
WAVE is connected.
WAVE Disconnected
WAVE is disconnected.
Setting Active WAVE Channel
WAVE channels are configured through CPS. Follow the
procedure to select the required WAVE channel.
1
Press to access the menu.
2
Press or to WAVE Channels. Press
to select.
3
Press or to the required WAVE channel.
Press to select.
4
Press or to Set As Active. Press
to select.
The display shows beside the selected channel.
English
Send Feedback 41