User's Guide

If the Emergency Alarm request fails, the radio does not
retry to send the request, and enters the hot mic state
directly.
NOTICE:
Some accessories may not support hot mic. Check
with your dealer or system administrator for more
information.
Sending Emergency Alarms with Voice
to Follow
Follow the procedure to send Emergency Alarms with voice
to follow on your radio.
1 Press the programmed Emergency On button or the
Emergency
footswitch.
You see one of these results:
• The display shows Tx Alarm and the destination
alias.
• The display shows Tx Telegram and the
destination alias.
The green LED lights up. The Emergency icon
appears.
2
Once the display shows Alarm Sent, speak clearly
into the microphone.
The radio automatically stops transmitting when:
• The cycling duration between hot mic
and
receiving calls expires, if Emergency Cycle Mode
is enabled.
• The hot mic duration expires, if Emergency Cycle
Mode is disabled.
3 Press the Emergency Off button to exit the
Emergency mode.
The radio returns to the Home screen.
Reinitiating Emergency Mode
This feature is only applicable to the radio sending the
Emergency Alarm. Follow the procedure to reinitiate
Emergency mode on your radio.
Do one of the following:
• Change the channel while the radio is in
Emergency mode. The radio exits the Emergency
English
Send Feedback 401