User's Guide

3
Press and select Yes to exit the Alarm list.
4
Press to access the menu.
5
Select Alarm List to revisit the Alarm list.
6 The tone sounds and the LED blinks red until you
exit the Emergency mode. However, the tone can be
silenced. Do one of the following:
•
Press the PTT button to call the group of radios
which received the Emergency Alarm.
• Press any programmable button.
• Exit Emergency mode. See Exiting Emergency
Mode After Receiving the Emergency Alarm on
page 398.
Responding to Emergency Alarms
Follow the procedure to respond to Emergency Alarms on
your radio.
1 Make sure the display shows the Alarm List.
Press
or to the required alias or ID.
2
If the Channel Free Indication feature is enabled,
you hear a short alert tone the moment the
transmitting radio releases the PTT button, indicating
the channel is free for you to respond. Press the
PTT
button to transmit non-emergency voice to the same
group the Emergency Alarm targeted.
The green LED lights up. Your radio remains in the
Emergency mode.
3 Do one of the following:
• Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
• Wait for the PTT Sidetone to end and speak
clearly into the microphone if enabled.
4 Release the PTT button to listen.
When the emergency initiating radio responds:
• The green LED blinks.
English
Send Feedback 397