User's Guide

NOTICE:
When you configure Receive Group Message In
Scan, your radio is able to receive group messages
from non-home channels. Your radio is able to reply
the group messages on home channel but is not
able to reply on non-home channels. Check with
your dealer or system administrator for more
information.
Turning Scan On or Off
Follow the procedure to turn scan on or off on your radio.
1
Press to access the menu.
2
Press or to Scan. Press to select.
3
Press or to Scan State. Press to
select.
4
Press or to the required scan state and
press
to select.
If scan is enabled:
• The display shows Scan On and Scan icon.
• The yellow LED blinks.
If scan is disabled:
• The display shows Scan Off.
• The Scan icon disappears.
• The LED turns off.
Responding to Transmissions During
Scanning
During scanning, your radio stops on a channel or group
where activity is detected. The radio stays on that channel
for a programmed duration known as hang time. Follow the
procedure to respond to transmissions during scanning.
1
If the Channel Free Indication feature is enabled,
you hear a short alert tone the moment the
transmitting radio releases the PTT button, indicating
the channel is free for you to respond. Press the
PTT
button during hang time.
The green LED lights up.
2 Release the PTT button to listen.
English
Send Feedback 377