User's Guide

If Phone Call capability is not enabled on your radio, the
first line of the display shows Unavailable and your radio
mutes the call. Your radio returns to the previous screen
when the call ends.
1 Press the PTT button to respond to the call. Release
the PTT button to listen.
2
Press to end the call.
The display shows Ending Phone Call.
If the call ends successfully:
• A tone sounds.
•
The display shows Call Ended.
If the call fails to end, the radio returns to the Phone
Call screen. Repeat this step or wait for the
telephone user to end the call.
Stopping Radio Calls
This feature allows you to stop an ongoing Group or Private
Call to free the channel for transmission. For example,
when a radio experiences a "stuck microphone" condition
where the PTT button is inadvertently pressed by the user.
Your radio must be programmed to allow you to use this
feature. Follow the procedure to stop calls on your radio.
1 Press the programmed Transmit Interrupt Remote
Dekey button.
The display shows Remote Dekey.
2 Wait for acknowledgment.
If successful:
• A positive indicator tone sounds.
• The display shows Remote Dekey Success.
If unsuccessful:
• A negative indicator tone sounds.
• The display shows Remote Dekey Failed.
NOTICE:
Check with your dealer or system administrator for
more information.
English
364 Send Feedback