User's Guide

5
Enter the telephone number, and press to
proceed.
The display shows Access Code: and a blinking
cursor if the access code was not preconfigured.
6
Enter the access code, and press to proceed.
The access or deaccess code cannot be more than
10 characters.
7
The green LED lights up. The display shows the
Phone Call
icon at the top right corner. The first text
line shows the subscriber alias. The second text line
shows the call status.
If the call is successful:
• The DTMF Tone sounds.
• You hear the dialing tone of the telephone user.
• The first text line shows the subscriber alias.
• The display continues to show the Phone Call
icon at the top right corner.
If the call is unsuccessful:
• A tone sounds.
• The display shows Phone Call Failed and
then,
Access Code:.
• Your radio returns to the screen you were on
before initiating the call if the access code has
been preconfigured in the Contacts list.
8
Press to end the call.
9 Do one of the following:
• If the deaccess code was not preconfigured,
enter the deaccess code when the display shows
De
-Access Code:, and press
to proceed.
The radio returns to the previous screen.
• Press the programmed
One Touch Access
button.
If the entry for the One Touch Access button is
empty, a negative indicator tone sounds.
The DTMF Tone sounds and the display shows
Ending Phone Call.
If the call ends successfully:
• A tone sounds.
• The display shows Call Ended.
English
358 Send Feedback