User's Guide

• Your radio unmutes and the incoming call sounds
through the speaker.
1 Press the PTT button to respond to the call.
The green LED lights up.
2 Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
3 Release the PTT button to listen.
The call ends when there is no voice activity for a
predetermined period. A tone sounds. The display
shows Call Ended
.
Phone Calls
A Phone Call is a call from an individual radio to a
telephone.
If Phone Call capability is not enabled in your radio:
• The display shows Unavailable
.
• Your radio mutes the call.
• Your radio returns to the previous screen when the call
ends.
During the Phone Call, your radio attempts to end the call
when:
•
You press the One Touch Access button with the
deaccess code preconfigured.
•
You enter the deaccess code as the input for extra
digits.
During channel access, access or deaccess code, or extra
digits transmission, your radio responds to the On/Off ,
Volume Control, and Channel Selector buttons or knobs
only. A tone sounds for every invalid input.
During channel access, press
to dismiss the call
attempt. A tone sounds.
NOTICE:
The access or deaccess code cannot be more than
10 characters.
Check with your dealer or system administrator for
more information.
English
Send Feedback 353