User's Guide

Basic Operations
This chapter explains the operations to get you started on
using the radio.
Powering Up the Radio
Follow the procedure to power up your radio.
Press the On/Off button.
If successful:
• A tone sounds.
•
The green LED lights up.
• The display shows MOTOTRBO (TM), followed by a
welcome message or image.
• The Home screen lights up.
If the Tones/Alerts function is disabled, there is no tone
upon powering up.
Check your battery if your radio does not power up. Make
sure that it is charged and properly attached. Contact your
dealer if your radio still does not power up.
Powering Off the Radio
Follow the procedure to power off your radio.
Press and hold the On/Off button.
The radio may take up to seven seconds to
completely turn off.
The display shows Powering Down.
Adjusting the Volume
Follow the procedure to change the volume level of your
radio.
Do one of the following:
• Turn the
On/Off/Volume Control Knob
clockwise to increase the volume.
• Turn the On/Off/Volume Control Knob
counterclockwise to decrease the volume.
English
Send Feedback 35