User's Guide

button press. Your radio can have multiple One Touch
Access buttons programmed.
Programmable Button
This method is used for Phone Calls only.
Volume/Channel Selector Knob
This method manually selects a subscriber alias or ID,
or group alias or ID.
The LED lights up solid green while the radio is transmitting
and blinks green when the radio is receiving.
NOTICE:
The LED lights up solid green while the radio is
transmitting and double blinks green when the radio
is receiving a privacy-enabled call.
To unscramble a privacy-enabled call, your radio
must have the same Privacy Key, or the same Key
Value and Key ID (programmed by your dealer), as
the transmitting radio (the radio you are receiving
the call from).
See Privacy on page 430
for more information.
Group Calls
Your radio must be configured as part of a group to receive
a call from or make a call to the group of users.
Making Group Calls
Follow the procedure to make Group Calls on your radio.
1 Do one of the following:
• Select a channel with the active group alias or ID.
•
Press the programmed One Touch Access
button.
2 Press the PTT button to make the call.
The green LED lights up.
The display shows the
Group Call icon and the group call alias.
3 Release the PTT button to listen.
The green LED lights up when the target radio
responds.
The display shows the Group Call icon,
the group alias or ID, and the transmitting radio alias
or ID.
4
If the Channel Free Indication feature is enabled,
you hear a short alert tone the moment the
transmitting radio releases the PTT button, indicating
the channel is free for you to respond. Press the PTT
button to respond to the call.
English
342 Send Feedback