User's Guide

Turning the Power Up Alert Tone On or
Off
You can enable and disable the Power Up Alert Tone if
needed.
1
Press to access the menu.
2
Press or to Utilities and press
to select.
3
Press or to Radio Settings and press
to select.
4
Press
or to Tones/Alerts and press
to select.
5
Press or to Power Up and press to
select.
6
Press to enable/disable the Power Up Alert
Tone.
The display shows beside Enabled.
The disappears from beside Enabled.
Setting the Power Level
You can customize your radio power setting to high or low
for each Connect Plus zone.
High enables communication with tower sites in Connect
Plus mode located at a considerable distance from you.
Low enables communication with tower sites in Connect
Plus mode in closer proximity.
Press the programmed Power Level button
to toggle
transmit power level between high and low.
Follow the procedure described next to access this feature
via the radio menu.
1
Press
to access the menu.
English
Send Feedback 301