User's Guide

Press to turn on Wi-Fi. The display shows
beside Enabled.
Press to turn off Wi-Fi. The disappears
from beside Enabled.
Connecting to a Network Access Point
When you turn on Wi-Fi, the radio scans and connects to a
network access point.
NOTICE:
You can also connect to a network access point
using the menu.
The WPA-Enterprise Wi-Fi network access points
are pre-configured. Check with your dealer or
system administrator to determine how your radio
has been programmed.
1
Press
to access the menu.
2
Press or to WiFi and press to
select.
3
Press or to Networks and press to
select.
4
Press or to a network access point and
press to select.
NOTICE:
For WPA-Enterprise Wi-Fi, if a network
access point is not preconfigured, the
Connect option is not available.
5
Press
or to Connect and press to
select.
6 For WPA-Personal Wi-Fi, enter the password and
press .
7 For WPA-Enterprise Wi-Fi, password is configured
by using RM.
If the preconfigured password is correct, your radio
automatically connects to the selected network
access point.
English
294 Send Feedback