User's Guide

4 Release the PTT button to listen.
When the emergency initiating radio responds, the
LED blinks green. You see the Group Call icon, the
group ID, and transmitting radio ID on your display.
Responding to an Emergency Alert
NOTICE:
The Group contact used for the Emergency Alert
should not be used for voice communication. This
could prevent other radios from sending and
receiving Emergency Alerts on the same group.
An Emergency Alert from a radio indicates that the user is
in an urgent situation. You may respond to the alert by
initiating a private call to the radio who declared the
emergency, initiating a group call to a designated talk
group, sending the radio a Call Alert, initiating a Remote
Monitor of that radio, etc. The proper response is
determined by your organization and the individual
situation.
Ignore Emergency Revert Call
This feature enhancement is to provide an option for the
radio to ignore an active Emergency Revert Call.
To enable Ignore Emergency Revert Call, the radio must
be configured at the Connect Plus Customer Programming
Software (CPCPS).
When the feature is enabled, the radio does not display
Emergency Call indications and does not receive any audio
on the default Emergency Revert Group ID.
Check with your dealer or system administrator for more
information.
English
Send Feedback 265