User's Guide

Silent
Radio initiates an Emergency without any audio or
visual indicators. The radio suppresses all audio or
visual indications of the Emergency until you press the
PTT button to start a voice transmission.
Silent with Voice
The same as Silent operation, except that the radio also
unmutes for some voice transmissions.
Receiving an Incoming Emergency
Your radio may be programmed to sound an alert tone and
also display information about the incoming Emergency. If
so programmed, upon receiving the incoming Emergency,
the display shows the Emergency Details screen with the
emergency icon, the Alias or ID of the radio that requested
the Emergency, the Group Contact being used for the
Emergency, and one additional line of information. The
additional information is the name of the zone that contains
the Group Contact.
At the present time, the radio displays only the most
recently decoded Emergency. If a new Emergency is
received before the prior Emergency is cleared, the details
for the new Emergency replace the details of the previous
Emergency.
Depending on how your radio has been programmed, the
Emergency Details screen (or Alarm List screen) will stay
on your radio display even after the Emergency ends. You
can save the emergency details to the Alarm List, or you
can delete the emergency details as described in the
following sections.
Saving the Emergency Details to the
Alarm List
Saving the emergency details to the Alarm List allows you
to view the details again at a later time by selecting Alarm
List from the Main Menu.
1 While the Emergency Details (or Alarm List) screen
is displayed, press .
The Exit Alarm List screen displays.
2 Perform one of the following actions:
• Select Yes and press to save the
emergency details to the Alarm List, and to exit
the Emergency Details (or Alarm List) screen.
English
Send Feedback 263