User's Guide

If a check mark precedes the Group name, then
scan is currently enabled for this Group.
If there is no check mark preceding the Group name,
then scan is currently disabled for this Group.
4
to select the desired Group.
The display shows Enable if scan is currently
disabled for the Group.
The display shows Disable if scan is currently
enabled for the Group.
5
Select the displayed option (Enable or Disable) and
press
to select.
Depending on which option was selected, the radio
momentarily displays Scan Enabled or
Scan
Disabled as confirmation.
The radio displays the Zone scan list again. If scan was
enabled for the Group, the check mark displays before the
Group name. If scan was disabled for the Group, the check
mark is removed before the Group name.
Add or Delete a Group via the Add
Members Menu
The Connect Plus radio does not allow a duplicate group
number or a duplicate group alias to be placed on a zone
scan list (or to be shown as a "scan candidate"). Thus, the
list of "scan candidates" described in step 6 and step 7
sometimes changes after adding or deleting a group from
the zone scan list.
If your radio has been programmed to allow you to edit the
scan list, you can use the Add Members menu to add a
group to the scan list of the currently selected zone, or to
delete a group from the scan list of the currently selected
zone.
1
Press to access the menu.
2
Press or to Scan option and press
to select.
English
246 Send Feedback