User's Guide

Scan List member must be a regular Group Contact (for
example, not Multi-group or Site All Call/Network Wide All
Call) that is currently assigned to a Channel Selector
position in a Connect Plus Zone with the same Network ID
as the currently selected Zone. The Talkgroup alias must
not match any Talkgroup that has been included in the
current Zone Scan List.
Scan can be turned on or off from the menu or by pressing
a programmed Scan On/Off button.
This feature functions only when the radio is not currently
involved in a call. If you are presently listening to a call,
your radio cannot scan for other group calls, and is
therefore unaware they are in progress. Once your call is
finished, your radio returns to the control channel time slot
and is able to scan for groups that are in the scan list.
Turning Scan On or Off
NOTICE:
This procedure turns the Scan feature On or Off for
all zones with the same Network ID as your
currently selected zone. It is important to note that
even when the Scan feature is turned on via this
procedure, scan may still be disabled for some (or
all) groups on your scan list. See the next section
for more information.
If Scan is turned on, the Scan icon appears on your
display. When Scan is on and you are not participating in a
call, the LED blinks green and yellow.
The procedure for turning Scan on or off depends on how
your radio is programmed. If programmed with a Scan
On/Off button, use the button to toggle the feature on or off.
If your radio has been programmed so that Scan can be
turned on or off via the menu, follow the procedure
described next.
1
Press to access the menu.
2
Press or to Scan and press to
select.
English
244 Send Feedback