User's Guide

You can start and stop scanning by pressing the
programmed Scan button OR follow the procedure
described next.
1
Press to access the menu.
2
Press or to Scan and press to
select.
3
Press or to Turn On or Turn Off and
press to select.
• The display shows Scan On
if scan is enabled.
• The Scan menu shows Turn Off if scan is
enabled.
• The display shows Scan Off if scan is disabled.
• The Scan menu shows Turn On if scan is
disabled.
Responding to a Transmission During
a Scan
During scanning, your radio stops on a group where activity
is detected. The radio continuously listens for any member
in the scan list when idle on the control channel.
1 Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
2 Press the PTT button during hang time.
The LED lights up solid green.
3 Wait for the Talk Permit Tone to finish (if enabled),
and speak clearly into the microphone.
4 Release the PTT button to listen.
If you do not respond within the hang time, the radio
returns to scanning other groups.
User Configurable Scan
If the Edit List menu is enabled, a user is able to Add and
Remove the scan members from the Add Member menu. A
English
Send Feedback 243