User's Guide

Radio
Control
Steps
c Press or to the re-
quired subscriber alias or ID and
press to select.
d Press or to Manual
Dial and press to select.
e Press
or to Remote
Mon. and press to select.
The first text line shows Rem. Monitor. The second
text line displays the Target Alias, indicating the
request is in progress. The LED lights up blinking
green.
2 Wait for acknowledgment.
If successful, a positive indicator tone sounds and
the display momentarily shows Rem. Monitor
Successful. Your radio starts playing audio from
the monitored radio for a programmed duration and
display shows Rem. Monitor, followed by target
alias. Once the timer expires, the radio sounds an
alert tone and the LED turns off.
If unsuccessful, the radio sounds a negative
indicator tone the display shows Rem. Monitor
Failed.
Scan
This feature allows your radio to monitor and join calls for
groups defined in a pre-programmed scan list. When scan
is enabled, the scan icon appears on the status bar and the
LED blinks yellow when idle.
Starting and Stopping Scan
NOTICE:
This procedure turns the Scan feature On or Off for
all Connect Plus zones with the same Network ID as
your currently selected zone. It is important to note
that even when the Scan feature is turned on via
this procedure, scan may still be disabled for some
(or all) groups on your scan list. See Editing the
Scan List on page
245 for more information.
English
242 Send Feedback