User's Guide

an available site. If no other site is available, your radio
returns to Auto Fallback mode after searching is complete.
If you drive out of coverage of your Fallback repeater, your
radio enters Search mode (display indicates Searching
).
Radio Check
If enabled, this feature allows you to determine if another
radio is active in a system without disturbing the user of
that radio. No audible or visual notification is shown on the
target radio.
This feature is only applicable for subscriber aliases or IDs.
Sending a Radio Check
1 Access the Radio Check feature.
Radio
Control
Steps
Program-
med Ra-
dio
Check
button
a Press the programmed Radio
Check button.
Radio
Control
Steps
b Press or to the re-
quired subscriber alias or ID and
press to select.
Menu
a Press to access the menu.
b Press or to Con‐
tacts and press
to select.
c Press or to the re-
quired subscriber alias or ID and
press to select.
d Press or to Radio
Check and press to select.
The display shows the Target Alias, indicating the
request is in progress. The LED lights up solid
green.
English
240 Send Feedback