User's Guide

• Return to the home channel.
• Mute the reminder temporarily by using the
programmable button.
•
Set a new home channel by using the programmable
button.
Auto Fallback
Auto Fallback is a system feature that allows you to
continue to make and receive non-emergency calls on the
selected Group Contact in the event of certain types of
Connect Plus system failures.
If one of these failures occurs, your radio attempts to roam
to a different Connect Plus site. This search process may
result in your radio finding an operable Connect Plus site,
or it may result in your radio finding a “Fallback Channel” (if
your radio is enabled for Auto Fallback). A Fallback
Channel is a repeater that is normally part of an operable
Connect Plus site, but is currently unable to communicate
with either its site controller or the Connect Plus network. In
Fallback mode, the repeater operates as a single digital
repeater. Auto Fallback Mode supports non-emergency
Group Calls only. No other call types are supported in
Fallback Mode.
Indications of Auto Fallback Mode
When your radio is using a Fallback channel, you hear the
intermittent “Fallback Tone” approximately once every 15
seconds (except while transmitting). The display
periodically shows a brief message, “Fallback Channel”.
Your radio only permits PTT on the selected Group Contact
(Group Call, Multigroup Call, or Site All Call). It does not
allow you to make other types of calls.
English
238 Send Feedback