User's Guide

Making an Outbound Private Phone
Call via the Phone Menu
1
Press to access the menu.
2
Press or to Phone and press to
select.
3
Press to select Manual Dial.
The first line of the display shows Number, the
second line of the display shows a blinking cursor.
4 Use the keypad to enter a telephone number, and
press
to place a call to the entered number.
Press to delete any unwanted characters. Press
followed by within 2 seconds to insert a
pause. The P replaces *
and # on the display.
If successful, the first line of the display shows
Phone Call. The second line of the display shows
the dialed telephone number.
If an invalid telephone number is selected, the
display shows a negative mini notice, Phone Call
Failed, Resource Not Available, or Invalid
Permissions.
If
is pressed with no telephone number
entered, the radio sounds a positive indicator tone
then a negative indicator tone. The display remains
the same.
5
Long press
to end the call.
The first line of the display shows Ending. The
second line of the display shows Phone Call....
The display shows Phone Call Ended.
Making an Outbound Private Phone
Call from Contacts
NOTICE:
If the Phone Manual Dial is disabled in MOTOTRBO
Connect Plus Option Board CPS, the Phone
Number item will not be displayed in the Menu.
English
234 Send Feedback