User's Guide

to a short or long programmable button press. You can
only have one ID assigned to a One Touch Access
button. Your radio can have multiple One Touch
Access buttons programmed.
• The Contacts list (see Contacts Settings on page 250).
NOTICE:
Your radio must have the Privacy feature enabled
on the channel to send a privacy-enabled
transmission. Only target radios with the same Key
Value and Key ID as your radio will be able to
unscramble the transmission.
See Privacy on page 280
for more information.
Making a Call with the Channel
Selector Knob
This feature allows the radio users to make different call
types : Group Call, Private Call, Site All Call, Multi-group
Call.
Making a Group Call
To make a call to a group of users, your radio must be
configured as part of that group.
1 Select the channel with the active group alias or ID.
See Selecting a Call Type on page 224.
2 Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
3 Press the PTT button to make the call.
The LED lights up solid green. The Group Call icon
appears in the top right corner. The first text line
shows the group call alias.
4 Wait for the Talk Permit Tone to finish (if enabled),
and speak clearly into the microphone.
5 Release the PTT button to listen.
When the target radio responds, the LED blinks
green, the radio unmutes and the response sounds
through the radio speaker
. You see the Group Call
icon, the group alias or ID, and transmitting radio
alias or ID on your display.
If there is no voice activity for a predetermined
period of time, the call ends. Radio returns to the
screen you were on prior to initiating the call.
English
Send Feedback 229