User's Guide

3
Press to select.
The display shows <Zone> Selected momentarily
and returns to the selected zone screen.
Using Multiple Networks
If your radio has been programmed to use multiple Connect
Plus networks, you can select a different network by
switching to the Connect Plus zone that is assigned to the
desired network. These network-to-zone assignments are
configured by your dealer through radio programming.
Selecting a Call Type
Use the Channel Selector Knob to select a call type. This
can be a Group Call, Multi-group Call, Site All Call or
Private Call, depending on how your radio is programmed.
If you change the Channel Selector Knob to a different
position (that has a call type assigned to it),
this causes the
radio to re-register with the Connect Plus site. The radio
registers with the Registration Group ID that has been
programmed for the new Channel Selector Knob position
call type.
If you select a position that has no call type assigned to it,
your radio sounds a continuous tone
and the display shows
Unprogrammed
. Your radio does not operate when selected
to an unprogrammed channel, use the Channel Selector
Knob to select a programmed channel instead.
Once the required zone is displayed (if you have
multiple zones in your radio), turn the programmed
Channel Selector Knob to select the call type.
Receiving and Responding to a
Radio Call
Once the channel, subscriber ID or call type is displayed
,
you can proceed to receive and respond to calls.
The LED lights up solid green while the radio is transmitting
and blinks green when the radio is receiving.
English
224 Send Feedback