User's Guide

Roam Request
A Roam Request tells the radio to search for a different
site, even if the signal from the current site is acceptable.
If there are no sites available:
• The radio displays Searching
and Selected Channel
Alias and continues to search through the list of sites.
• The radio will return to the previous site, if the previous
site is still available.
NOTICE:
This is programmed by your dealer.
Press the programmed Roam Request button.
You hear a tone, indicating the radio has switched to
a new site.
The display shows Site ID <Site
Number>.
Site Lock On/Off
When toggled on, the radio searches the current site only.
When toggled off, the radio searches other sites in addition
to the current site.
Press the programmed Site Lock button.
If the
Site Lock function is toggled on:
• You hear a positive indicator tone, indicating the
radio has locked to the current site.
• The display shows Site Locked.
If the Site Lock function is toggled off:
• You hear a negative indicator tone, indicating the
radio is unlocked.
• The display shows Site Unlocked.
Site Restriction
Your Connect Plus radio system administrator has the
ability to decide which network sites your radio is and is not
allowed to use. Your radio does not need to be
reprogrammed to change the list of allowed and disallowed
sites. If your radio attempts to register at a disallowed site,
English
222 Send Feedback