User's Guide

Positive Indicator Tone
Negative Indicator Tone
Alert Tones
Alert tones provide you with audible indications of the
status, or response to data received on the radio.
Continuous Tone A monotone sound.
Sounds continuously until
termination.
Periodic Tone Sounds periodically de-
pending on the duration
set by the radio. Tone
starts, stops, and repeats
itself.
Repetitive Tone A single tone that repeats
itself until it is terminated
by the user.
Momentary Tone Sounds only once for a
short period of time de-
fined by the radio.
Switching Between Connect Plus
and Non-Connect Plus Modes
To switch to a non-Connect Plus mode, you must change
to another zone, if programmed by your dealer or system
administrator. Check with your dealer or system
administrator to see if your radio has been programmed
with non-Connect Plus zones, and what features are
available while operating in non-Connect Plus zones.
Making and Receiving Calls
in Connect Plus Mode
This section explains general radio operations and call
features that are available in your radio.
Selecting a Site
A site provides coverage for a specific area. A Connect
Plus site has a site controller and a maximum of 15
repeaters. In a multi-site network, the Connect Plus radio
will automatically search for a new site when the signal
level from the current site drops to an unacceptable level.
English
Send Feedback 221