User's Guide

LED Indicator
The LED indicator shows the operational status of your
radio.
Blinking red Radio is transmitting at low battery
condition, receiving an emergency
transmission or has failed the self-test
upon powering up, or has moved out
of range if radio is configured with Au-
to-Range Transponder System
. Mute
Mode is enabled.
Rapidly
blinking red
Radio is receiving over-the-air file
transfer (Option Board firmware file,
Network Frequency file or Option
Board Codeplug file) or upgrading to a
new Option Board firmware file.
Blinking
green and
yellow
Radio is receiving a Call Alert, re-
ceived a text message or Scan is ena-
bled and is receiving activity.
Solid yellow Radio is in Bluetooth Discoverable
Mode.
Double
blinking yel-
low
Radio is actively searching for a new
site.
Blinking yel-
low
Radio is receiving a Call Alert or Scan
is enabled and is idle (radio will remain
muted to any activity).
Solid green Radio is powering up or transmitting.
Blinking
green
Radio is powering up, receiving a call
or data.
Double
blinking
green
Radio is receiving a privacy-enabled
call.
Indicator Tones
The following are the tones that sound through the radio
speaker.
High pitched tone Low pitched tone
Indicator tones provide you with audible indications of the
status after an action to perform a task is taken.
English
220 Send Feedback