User's Guide

Accessing Notification List
Follow the procedure to access the Notification list on your
radio.
1
Press to access the menu.
2
Press or to Notification. Press
to select.
3
Press or to the required event. Press
to select.
Long press
to return to the Home screen.
Over-the-Air Programming
Your dealer can remotely update your radio by using Over-
the-Air Programming (OTAP) without physical connection.
Additionally, some settings can also be configured by using
OTAP.
When your radio undergoes OTAP, the green LED blinks.
When your radio receives high volume data:
• The display shows the High Volume Data icon.
• The channel becomes busy.
•
A negative tone sounds if you press the PTT button.
When OTAP completes, depending on the configuration:
• A tone sounds. The display shows Updating
Restarting. Your radio restarts by powering off and on
again.
• You can select Restart Now or Postpone. When you
select Postpone, your radio returns to the previous
screen. The display shows the OTAP Delay Timer icon
until the automatic restart occurs.
When your radio powers up after automatic restart:
• If successful, the display shows Sw Update
Completed.
• If unsuccessful, the display shows Sw Update Failed.
See Checking Software Update Information on page 209
for the updated software version.
English
Send Feedback 181