User's Guide

• Press or to Off. Press to
select. The display shows beside Off.
Stun/Revive
This feature allows you to enable or disable any radio in the
system. For example, the dealer or system administrator
may want to disable a stolen radio to prevent unauthorized
users from using it, and enable the radio when it is
recovered.
A radio can be disabled (stunned) or enabled (revived)
either through the console or through a command initiated
by another radio.
Once a radio is disabled, the radio sounds a negative
indicator tone and the home screen shows Channel
Denied.
When a radio is stunned, the radio cannot request nor
receive any user initiated services on the system that
performed the Stun procedure. However, the radio can
switch to another system. The radio continues to send
GNSS location reports and can be monitored remotely
when it was stunned.
NOTICE:
The dealer or system administrator may
permanently disable a radio. See Radio Kill on page
177
for more information.
Stunning a Radio
Follow the procedure to disable a radio.
1 Press the programmed Radio Disable button.
2
Press or to the required alias or ID.
Press to select.
The display shows a transitional mini notice,
indicating the request is in progress. The green LED
blinks.
3 Wait for acknowledgment.
If successful:
• A positive indicator tone sounds.
•
The display shows a positive mini notice.
If unsuccessful:
English
172 Send Feedback