User's Guide

5
Press or to the desired new home
channel alias. Press to select.
The display shows beside the selected home
channel alias.
Remote Monitor
This feature is used to turn on the microphone of a target
radio with a subscriber alias or ID.
You can use this feature
to remotely monitor any audible activity surrounding the
target radio.
Both your radio and the target radio must be programmed
to allow you to use this feature.
If initiated, the green LED blinks once on the target radio.
This feature automatically stops after a programmed
duration or when there is any user operation on the target
radio.
Initiating Remote Monitor
Follow the procedure to initiate Remote Monitor on your
radio.
1 Press the programmed Remote Monitor button.
2
Press or to the required alias or ID.
Press to select.
The display shows a transitional mini notice,
indicating the request is in progress. The green LED
lights up.
3 Wait for acknowledgment.
If successful:
• A positive indicator tone sounds.
•
The display shows a positive mini notice.
• The audio from the monitored radio starts playing
for a programmed duration, and the display
shows Rem. Monitor. Once the timer expires, an
alert tone sounds, and the LED turns off.
If unsuccessful:
• A negative indicator tone sounds.
• The display shows a negative mini notice.
English
112 Send Feedback