User Manual

Note:
Do not press during the Radio
Enable operation as you will not get an
acknowledgement message.
Password Lock Features
If enabled, this feature only allows you access your
radio if the correct password is entered upon
powering up.
You can use a keypad microphone or Scroll Up/
Down buttons to enter password.
Accessing the Radio from Password
1 Power up your radio.
You hear a continuous tone.
2 Do one of the following:
• Enter your current four-digit password via
keypad microphone. The display shows .
Press to proceed.
• Enter your current four-digit password. Press
or to edit each digit’s numeric
value and
to enter the selected digit and
move to the next digit. Each digit changes to .
Press to confirm your selection.
You hear a positive indicator tone for every digit
entered. Press to remove each on the
display. You hear a negative indicator tone, if you
press when the line is empty, or if you press
more than four digits.
If the password is correct, your radio proceeds to
power up. See Powering Up the Radio on page
22.
If the password is incorrect, the display shows
Wrong Password. Repeat Step 2.
After the third incorrect password, the display
shows Wrong Password and then, shows Radio
Locked. A tone sounds and the LED double blinks
yellow.
Your radio enters into locked state for 15 minutes,
and responds to inputs from On/Off Button and
programmed Backlight button only.
Keypad Microphone Features
170
English