User Manual

During channel access and access/
deaccess code or extra digits transmission,
you radio responds to On/Off button,
Volume Knob, and Channel Rocker only.
A tone sounds for every invalid input.
The access or deaccess code cannot be
more than 10 characters.
Making a Phone Call from Contacts
1
to access the menu.
2
or to Contacts and press to
select.
The entries are alphabetically sorted.
3 Do one of the following:
•
or to the required subscriber alias
or ID.
•
or to Manual Dial and press
to select.
or
to Phone Number and press
to select.
The first line of the display shows Phone
Number:. The second line of the display shows
a blinking cursor. Use the keypad to enter a
telephone number.
4
Press to select.
If the entry selected is empty, a negative indicator
tone sounds and the display shows Phone Call
Invalid #.
5
or to Call Phone and press to
select.
If the access code was not preconfigured in the
Contacts list, the first line of the display shows
Access Code:. The second line of the display
shows a blinking cursor. Enter the access code
and press the button to proceed.
The first line of the display shows Calling. The
second line of the display shows the subscriber
alias or ID, and the Phone Call icon.
Keypad Microphone Features
152
English