Installation Manual

ManualsBrandsMotorola Solutions ManualsElectronicsMobile 2-Way Radio

Table Of Contents

Chapter 1 Introduction
1.1 Mobile Radio Description
- 1.1.1 Overview
- 1.1.2 Dimensions
- 1.1.3 Connections on the Back of the Radio
1.2 Standard Configurations
- 1.2.1 Dash Mount Configuration
- 1.2.2 Remote Mount Configuration (XPR 4000/XPR 4000e Series Mobiles Only)
1.3 Base/Control Stations
Chapter 2 Installation Details for Standard Configurations
2.1 Planning the Installation
- 2.1.1 Tools Required for Installation
- 2.1.2 Installation Example
- 2.1.3 Wiring Diagrams
2.2 Radio Mounting
- 2.2.2 Locking Kit (Optional)
  - 2.2.2.1 All Radios
- 2.2.3 DIN Mount
- 2.2.4 Remote Mount with Trunnion
2.3 Power Cable
2.4 Ignition Sense Cable
2.5 Antenna Installation
- 2.5.1 Selecting an Antenna Site/Location on a Metal Body Vehicle
- 2.5.2 Antenna Installation Procedure
- 2.5.3 Antenna Connection
2.6 Microphone Hang-Up Clip
- 2.6.1 Standard Hang-Up Clip
2.7 Completing the Installation
Chapter 3 Options and Accessories Installation
3.1 Accessory Installation
- 3.1.1 Emergency Pushbutton or Footswitch Installation
- 3.1.2 Horn and Lights (External Alarm) Relay
- 3.1.3 External Speaker
Chapter 4 Best Practices: Installation & Troubleshooting
4.1 Check Wiring of Ignition and Radio Ignition Sensing
4.2 Check Physical Installation of Radio Ground and Radio Accessory Wiring
4.3 Improve the Electrical Quality of the Power and Ignition Lines
4.4 Jump-Start the Vehicle
4.5 Eliminate Noise/Howling from PA Speaker
A.1 Basic Ordering Information
A.2 Motorola Online
A.3 Mail Orders
A.5 Fax Orders
A.6 Parts Identification
A.7 Product Customer Service
B.1 Servicing Information
B.2 Motorola Service Center
B.3 Motorola Federal Technical Center
B.4 Motorola Canadian Technical Logistics Center

Installation Details for Standard Configurations Completing the Installation 2-15

Notes