User Manual

The entries are alphabetically sorted.
3 Key in the first character of the required alias, and
then press or to locate the required
alias.
4 Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
5 Press the PTT button to make the call.
The LED lights up solid green. The display shows
the destination alias.
6 Wait for the Talk Permit Tone to finish (if enabled),
and speak clearly into the microphone.
7 Release the PTT button to listen.
When the target radio responds, the LED blinks
green.
If there is no voice activity for a predetermined
period of time, the call ends.
The display shows Call Ended.
Adding a New Contact
1
to access the menu.
2
or to Contacts and press to
select.
3
or to New Contact and press to
select.
4 Use the keypad to enter the contact number and
press
to confirm.
5 Use the keypad to enter the contact name and
press to confirm.
6
If adding a Radio Contact,
or to the
required ringer type and press
to select.
The radio sounds a positive indicator tone and the
display shows Contact Saved.
Advanced Features in Connect Plus Mode
216
English