User Manual
Table Of Contents
- Contact Us
- Copyrights
- Document History
- Contents
- List of Figures
- List of Tables
- About VML750 LTE Vehicular Subscriber Modem (VSM) Installation Guide
- VML750 Description
- VML750 Installation
- VML750 Troubleshooting Causes and Indicators
- VML750 Operation
- VLM750 Specifications
- LTE LMR Antennas Mounting Recommendations
Send Feedback
25
6802988C54-D
Chapter 2: VML750 Installation
5
WiFi LED is tuned off until WiFi configuration was performed. See the VML750 Configuration
Guide, PN 6802988C55.
6
After configuring the modem to WiFi Access Point mode, the WiFi LED turns green. When
data is transferred, the WiFi LED blinks green.
7
If a SIM card is inserted and the SIM door is closed and you are in an LTE coverage area, the
following sequence takes place:
a
LTE LED blinks orange while the modem searches for the LTE network.
b
LTE LED blinks green while registering to the network.
c
LTE LED is solid green after registration and activation.
8
If your VML750 is equipped to support LTE, activate it on the associated LTE network (your
private PS LTE network or on the public carrier network). Contact the manager of your network
(Motorola, public carrier, or your internal technical support) and provide the SIM card identifier
number, called the IMSI. This identifier can be found on the plastic credit card frame for the SIM.
NOTICE: The time for registering and activating your account may vary and could
typically take up to 2 minutes.
•
If the SIM door is not closed, the LTE LED rapidly blinks red.
•
If SIM card is not inserted, the LTE LED blinks red.