User's Manual

4. When finished, click “Next” to continue to LTE security configuration.
Configuring the VML700 Security
If required by your service provider, you will need to configure your VML700 security settings.
1.
The following window appears.
2. Using the pull-down menu, select the required authentication method.
Two Authentication Methods are available (check with your service supplier): EAP-TLS does not require user
name and password, and EAP-TTLS/MS-CHAPv2 that require user name and password.
3. If EAP-TTLS/MS-CHAPv2 Authentication Method is selected, the User Name, Password and Password
Confirmation fields are enabled.
4. Fill in the required user name and password.
5. When finished, click “Apply”.
Configuring the Ignition Switch
1. Turn the VML700 On by pressing the On/Off button on the LED Indicator Panel to On.