User's Manual
Table Of Contents
- Patents
- Warranty
- Legal Notice
- Revision History
- Introduction
- Configurations
- Chapter Descriptions
- Notational Conventions
- Related Documents
- Service Information
- Safety
- FCC Interference
- VML700 Description
- Installation
- Configuring and Monitoring the VML700
- Troubleshooting
- Using the VML700
- Specifications
- Reference
Planning is the key to fast, easy and safe installation.
Installation Constraints
Refer to the Safety Instructions in “Product Safety and RF Energy Exposure Booklet for Mobile Two-Way Radios in
Vehicles or as Fixed Site Control” P/N 6881095C99.
The LTE VML700 must be installed in the car’s trunk, on the floor or the side walls (cooling fins facing up, or to the
side)
.
Figure 2-1 shows a typical VML700 installation in a car.
VML700 - Typical Car Installation
Before beginning the installation process make sure that the space available at the installation site is adequate for
the modem and its accessories. Each installation configuration requires a different area for mounting the modem
without obstruction.
When choosing a location, ensure easy installation and replacement of the unit.
MPORTANT Take the following points into consideration when selecting a location and planning the installation.
IMPORTANT The VML700 must not be installed with the cooling fins facing down. Failure to comply may cause
overheat problems and performance degradation.
Diversity
MAIN
VML700
Trunk Floor