User's Manual
Table Of Contents
- Patents
- Warranty
- Revision History
- Introduction
- Configurations
- Chapter Descriptions
- Notational Conventions
- Related Documents
- Service Information
- Safety
- FCC Interference
- WiMAX VSM Description
- Installation
- Configuring and Monitoring the VSM
- Troubleshooting
- Specifications
- Reference
3 - 4 WiMAX VSM Installation Guide
Configuring the WiMAX VSM Security
NOTE If required by your service provider, you will need to configure your WiMAX VSM security settings.
1.
In the upper part of the window, click on the “Internet” tab. The following window appears.
2. Verify that the WiMAX Security tab is selected.
3. Using the pull-down menu, select the authentication method.
4. According to the selected authentication method, fill in the required user name and password.
5. When finished, click “Apply”.