User's Manual

2 - 14 WiMAX VSM Installation Guide
LAN/Ethernet Cable Installation
Cap Installation
Process 2-8 How to Install the LAN/Ethernet Cable
1 Connect the LAN/Ethernet cable from the LAN connector on the Connectors panel to the input/output device.
Verify that the cable P/N label is facing the opposite side of the VSM cooling fins.
See
Figure 2-11.
Do not use pliers or any other metallic tool for tightening. Hand tighten only!
Figure 2-11 LAN Cable Connector Installation
LAN Cable
P/N Label
Cooling
Fins
Process 2-9 How to Install Cap(s) on Unused Connector(s)
1 Screw cap(s) on unused port(s) to protect connector(s).