User's Manual

Installation 2 - 11
Modem Installation Procedure
Process 2-3 describes how to install the modem on a flat surface.
Process 2-3 How to Install the Modem on a Flat Surface
1 Position the tray in the desired location. Mark the positions of the six bottom mounting holes (1) using the tray
as a template. Be careful not to affect the tray. See Figure 2-8.
Figure 2-8 Mounting Tray
2 Centerpunch the marked spots and fix the tray in position using the self-drilling supplied screws.
3 Slide the VSM onto the tray, first inserting the Connectors panel (1). Press the VSM down until it is fully
seated in the tray. Fasten the VSM into the mounting tray using the supplied 4 screws (2). See Figure 2-9.
Figure 2-9 VSM in the Mounting Tray
1
1
2