User's Manual
Table Of Contents
- Patents
- Warranty
- Revision History
- Introduction
- Configurations
- Chapter Descriptions
- Notational Conventions
- Related Documents
- Service Information
- Safety
- FCC Interference
- WiMAX VSM Description
- Installation
- Configuring and Monitoring the VSM
- Troubleshooting
- Specifications
- Reference
Installation 2 - 9
Mounting Tray
Use the tray for mounting the VSM securely on a flat surface.
Figure 2-7
Tray Dimensions
Modem Installation Process
Process 2-1 describes the steps for the modem installation.
11.1”
(28.2 cm)
8.19”
(20.8 cm)
2.7”
(6.9 cm)
Process 2-1
Modem Installation Process
1
Ensure adequate space for the installation. (See Planning the Installation on page 2-3)
2
Install the antennas. (See Antennas Mounting on page 2-10).
3
Route the cables. (See Planning the Installation on page 2-3 and Cables Routing and Connection Procedure
on page 2-12)
4
Install the tray and the unit. (See Modem Installation Procedure on page 2-11.)
5
Connect the DC Power and Ignition cable. (See DC Power and Ignition Cable Installation on page 2-12)
6
Connect the two WiMAX cables. (See WiMAX Antenna Cable Installation on page 2-13)
7
Connect the WiFi cable. (See WiFi Antenna Cable Installation on page 2-13)