User's Manual

Configuring and Monitoring the VSM 3 - 5
Configuring the WiMAX VSM Time Zone
1. In than upper part of the window, click on the “Personalize” tab. The following window appears.
2. Verify that the “Device Time” tab is selected.
3. Using the pull-down menu, select the required Time Zone.
4. If required, check the “Auto Adjust for Daylight Saving Time” checkbox.
5. When finished, click “Apply”.
Monitoring the WiMAX VSM Operation
NOTE Verify that the Status Utility is installed on your computer.
When your VSM is up and running, the following signal strength icon is displayed on the status tray.
This icon displays the received signal strength and enables the access into the status utility screens.
1. Move your mouse over the signal strength icon. The following information message is displayed.