User's Manual
Table Of Contents
- Declaration of Conformity
- Important Safety Information
- Software Version
- Computer Software Copyrights
- Documentation Copyrights
- Disclaimer
- Getting Started
- Preparing Your Radio for Use
- Identifying Radio Controls
- Identifying Status Indicators
- General Radio Operation
- Advanced Features
- Advanced Call Features
- Multiple Control Head Features
- Contacts
- Scan Lists
- Scan
- Call Alert Paging
- Emergency Operation
- Automatic Registration Service (ARS)
- Text Messaging Service (TMS)
- Secure Operation
- Global Positioning System (GPS) Enabled
- Trunking System Controls
- Utilities
- Viewing Recent Calls List
- Selecting the Power Level
- Selecting a Radio Profile
- Enabling and Disabling the Radio Alias
- Controlling the Display Backlight
- Turning Keypad Tones On or Off
- Turning Voice Mute On or Off
- Using the Time-Out Timer
- Using the Conventional Squelch Operation Features
- Using the PL Defeat Feature
- Using the Digital PTT ID Feature
- Using the Smart PTT Feature (Conventional Only)
- Accessing General Radio Information
- Viewing Control Assignments
- Optional External Alarms (Horn and Lights)
- Helpful Tips
- Accessories
- Appendix: Maritime Radio Use in the VHF Frequency Range
- Glossary
- Commercial Warranty and Service
- Index
Advanced Features
English
39
Note: Only two (2) control heads are supported in the one
active mode.
Follow the procedure below to toggle between the two control
heads.
Procedure:
Press the Menu Select button directly below F/R.
OR
Press the Menu Select button preprogrammed user button on
the keypad microphone.
Intercom Features
The intercom feature allows a user at one control head to talk to
the user at the other control heads of a Multiple Control Head
configuration. At any given time, when a control head being
operated has priority for the intercom call, all other control
heads are blocked until the active control head releases PTT
button.
This can be made on any attached control head. This feature
only applies to control heads in the All Active mode.
Procedure:
1 Press the Menu Select button directly below INTC to
activate the intercom feature.
2 Press the PTT button on the microphone of one of the
control heads to initiate the audio transmission.
3 All control heads that are attached, receive the same
intercom call. The display of the receiving control heads
shows the alias/ID number of the transmitting control head.
Press the Menu Select button directly below
EXIT
to deactivate
the intercom feature.
OR
Press
H on any control head to deactivate the intercom
feature.
The intercom feature also deactivates when user initiates a
mode change. If the radio is on an emergency channel,
Transceiver
Z1
ZONE
CHAN
PWR
SQL
REMOTE
F/R
Active Radio
Non-Active Radio