User's Manual
Table Of Contents
- Declaration of Conformity
- Important Safety Information
- Software Version
- Computer Software Copyrights
- Documentation Copyrights
- Disclaimer
- Getting Started
- Preparing Your Radio for Use
- Identifying Radio Controls
- Identifying Status Indicators
- General Radio Operation
- Advanced Features
- Advanced Call Features
- Multiple Control Head Features
- Contacts
- Scan Lists
- Scan
- Call Alert Paging
- Emergency Operation
- Automatic Registration Service (ARS)
- Text Messaging Service (TMS)
- Secure Operation
- Global Positioning System (GPS) Enabled
- Trunking System Controls
- Utilities
- Viewing Recent Calls List
- Selecting the Power Level
- Selecting a Radio Profile
- Enabling and Disabling the Radio Alias
- Controlling the Display Backlight
- Turning Keypad Tones On or Off
- Turning Voice Mute On or Off
- Using the Time-Out Timer
- Using the Conventional Squelch Operation Features
- Using the PL Defeat Feature
- Using the Digital PTT ID Feature
- Using the Smart PTT Feature (Conventional Only)
- Accessing General Radio Information
- Viewing Control Assignments
- Optional External Alarms (Horn and Lights)
- Helpful Tips
- Accessories
- Appendix: Maritime Radio Use in the VHF Frequency Range
- Glossary
- Commercial Warranty and Service
- Index
Advanced Features
English
90
Changing the Selected Alarms
Press and hold the Menu Select button directly below H/L until
a tone sounds and the display indicates the currently selected
alarm.
Press the appropriate Menu Select button right below the menu
entry to review the choices until the display shows the desired
alarm:
• H/L – HORN/LITES ON (both horn and lights)
• LGTS – LIGHTS ON
• HORN – HORN ON
Receiving a Call While Alarms are Turned On
When a call is received, the vehicle’s horn sounds for four
seconds, and/or the car lights turn on for 60 seconds. The time
interval can be modified by a qualified radio technician.
The display will show the type of call received (CALL, PAGE, or
PHONE) and the selected mode name.
Turning Off Non-Rearmable External Alarms
Procedure:
1 Press the PTT button or any control-head button to turn off
the external alarm(s).
2 To rearm the horn and lights feature, press the Menu Select
button H/L momentarily.
Note: Pressing the Menu Select button directly below CALL,
PAGE or PHON will turn off the external alarm(s) and
place you directly in that feature.
The Volume knob and the Mode knob have no effect
on the state of the external alarm(s).
Turning Off Rearmable External Alarms
To turn off the external alarm(s), press the PTT button or any
control head button other than the Menu Select button directly
below H/L.
Note: Pressing the Menu Select button directly below CALL,
PAGE or PHON turns off the external alarm(s) and
places you directly in that feature.
When the external alarm(s) are turned off, they will be
automatically rearmed.
Pressing the Menu Select button directly below H/L turns off
the external alarm(s) and exits the horn and lights feature. To
rearm the feature, press the Menu Select button directly below
H/L momentarily.
Note: Note:The Volume knob and the Mode knob have no
effect on the state of the external alarms.