User Manual

12
Motorola Wireless Remote Control Adapter Installation
Attaching the Motorola Wireless
Remote Control Adapter to your
Joystick Controller
Your Wireless Wheels package contains a
Motorola Wireless Remote Control Adapter.
1 Locate the accessory connector on your joystick
controller.
2 Plug the end of the Motorola Wireless Remote
Control Adapter into the accessory connector.
3 The joystick controller will automatically connect
to an available car when one or more cars are
turned on and not controlled by other users. The
system will search for the last car that was
controlled by the Motorola Wireless Remote
Control Adapter. If the last car that was
controlled is found, it will immediately connect to
it. Otherwise, it will connect to the available car
with the strongest radio signal.
Tip: To remove the Motorola Wireless Remote
Control Adapter from the accessory
connector: Press the buttons on the sides
of the Adapter. Pull the Adapter straight out.
accessory
connector
Motorola Wireless
Remote Control Adapter
LED Status
Indicator
accessory
connector
Motorola Wireless
Remote Control Adapter