User's Guide

Contact Icon Description
Home
Work
PABX
Other
Pickers
Indicate more than one number in a contact.
# (number)
Each contact entry must contain a number.
Speed #
Shows the default Speed Dial number. You can accept or change it.
Simplex (Private only)
Shows the hook method for simplex calls.
Duplex (Private only)
Shows the hook method for duplex calls.
4.4.1
Creating Contacts
Procedure:
1 From the home screen, press Contacts.
2 Select [New Contact].
3 Highlight Name and press Change. Enter the name of your contact and press Ok.
4 Highlight Type and press Change. Select the required type of your contact.
NOTICE:
You can also use the Left and Right Navigation keys to select the type of your contact.
If Private is selected, you can set the hook method for Simplex and Duplex calls (if the
respective Private Call Hook Customization is enabled).
5 Highlight #
(number) and press Change. Enter the number of your contact and press Ok.
6 If needed, highlight Speed # and press Change. Enter the speed dial number (1–1000) and
press OK.
NOTICE: If the entered number exist, the radio displays Overwrite?. Press Yes to
confirm, or No to enter the speed dial number again.
7 Press Done.
You have created a contact with one number. To add more numbers, repeat steps step 4–step 6.
68015000180-MG
Chapter 4: Main Menu
82