User's Guide

4.3.5
Radio Messaging System (RMS) Box
RMS Box stores all incoming and outgoing Radio Messaging System (RMS) messages, both Status
messages and Free Text messages.
4.3.6
Wireless Application Protocol (WAP) Box
Each WAP Push message can be loaded immediately or stored as a message in WAP Box. To access
the WAP Box, press Menu → Messages → WAP Box. All the WAP Push messages are passed to
the browser.
4.3.7
Templates
A template box stores user-defined message templates.
Each message in Inbox and Outbox can be stored as a template. The name of the template and the
text can be edited later.
4.3.7.1
Sending User-Defined Templates
Procedure:
1 From the home screen, press the Menu key.
2 Select Messages → Templates.
3 Highlight the required template name and press Send.
4 Do one of the following:
If… Then…
If you want to send the message to a talk-
group,
select the required talkgroup from the Talk-
Group List.
If you want to send the message to an
address in your contact list,
perform the following actions:
a Press abc.
b Select the name of the recipient.
If you want to send the message to a
contact or talkgroup that is not config-
ured in the radio,
perform the following actions:
a Enter the contact number.
b Press Send.
4.3.7.2
Managing User-Defined Templates
Procedure:
1 From the home screen, press the Menu key.
2 Select
Messages → Templates.
3 Highlight the required template and press Menu.
4 Select one of the following options:
68015000180-MG
Chapter 4: Main Menu
75