User's Guide

The Phone/PABX Speed Dial feature allows you to dial a shortened number of up to three digits
instead of the full number. The Phone/PABX Speed # number is assigned when the dialed number is
added in the contact list.
5.9.2.1
Making Phone or PABX Calls
Prerequisites:
This feature is only available in Trunked Mode Operation (TMO).
Procedure:
1 From the home screen, enter the number.
2 If Phone or PABX is not the first type of call presented, press Ctype repeatedly to select it.
3 Press the Send key.
4 To end the call, press the End key.
NOTICE: If you are using the fist microphone or the telephone style handset, replace it
on its clip or holder to end the call.
5.9.2.2
Using the Phone/PABX Speed Dial
Procedure:
1 From the home screen, enter the predefined Phone/PABX speed dial number and # key.
2 Press Send key.
5.9.3
Receiving Individual Calls
Procedure:
1 Use one of the following methods to answer a private, phone, or Private Automatic Branch
Exchange (PABX) call.
•
Press the PTT button.
• Press the Send key.
• Remove the fist microphone or the telephone style handset from its clip or holder.
If the microphone or handset is off the hook, the external speaker of the radio mutes and the
earpiece of the microphone or handset activates. Depending on their availability, audio is routed
to the audio input devices in the following order:
1 A visor microphone.
2 A microphone of the device that is off hook.
3 A microphone that was last in use (if two devices are off hook).
If an accessory is connected through the junction box, the active microphone depends on the
hook state of the accessory:
• If the accessory is on the hook, the visor microphone is active.
• If the accessory is off the hook, the microphone of the accessory connected to the telco
connector is active.
2 To end the call, press the End key.
68015000180-MG
Chapter 5:
Features
129