User Manual

Table Of Contents
DMODMO
When the radio connects to a repeater, it plays a tone, displays the Repeater available message, and
shows an appropriate icon. When the radio looses connection with the repeater, it plays a tone,
displays the Repeater not available message, and the repeater icon is blinking.
Communication through Gateways
Gateway provides connectivity between radios operating in DMO Mode and the TETRA network, so
that the DMO radios can communicate with the TMO radios.
DMO
TMO
TMO
When the radio connects to a gateway, it plays a tone, displays the Gateway available message and
shows an appropriate icon. When the radio looses connection with the gateway, it plays a tone,
displays the Gateway not available message, and the gateway icon is blinking.
Selecting DMO Group Call Options
When and where to use: Helps to communicate with other radio users on the same talkgroup through
the Gateway or Repeater.
Procedure:
1 From the home screen, press Optns.
2 Press Config.
3 Select one of the following:
Chapter 3: Modes
56 Send Feedback