User Manual
Table Of Contents
- Contents
- List of Figures
- List of Tables
- Copyrights
- General Information
- Getting Started
- Product Technical Information
- Controls and Indicators
- Display
- Status Icons
- Powering On the Radio
- Unlocking Your Radio
- Locking/Unlocking the Keys/Buttons
- External SIM Card Priority
- Entering TMO / DMO Mode
- Transmit Inhibit Mode
- Selecting Talkgroups
- Talkgroup Icon Selection
- Using Timed Talkgroup Change
- Activating Talkgroup Scanning
- Broadcast Call
- Ambience Listening (AL) Call
- One-Touch Button Feature
- Terminal Temporary Disable/Enable
- Terminal Permanent Disable
- During the Call
- Writing Text
- Home Display Text Message
- Modes
- Using Networks
- Trunked Mode Operation
- Entering TMO Mode
- Selecting Talkgroups
- Making Group Calls in TMO
- Receiving Group Calls in Idle
- Receiving Group Calls during Ongoing Group Calls
- Dynamic Group Number Assignment (DGNA)
- DGNA Reception
- DGNA Auto Select Group
- DGNA Auto Reselect Group
- Viewing DGNA Talkgroups
- Broadcast Calls Initiated by Users
- Initializing Broadcast Calls
- Phone and PABX Calls
- Private Call
- Making Private Calls
- Assistance Call
- Call Modification
- Local Site Trunking
- Direct Mode Operation
- Entering DMO Mode
- Selecting Talkgroups
- Making Group Calls in DMO
- Receiving Group Calls in Idle
- Private Call
- Making Private Calls
- Private Call With Presence Check
- DMO Private Priority Call
- Talkgroup for Individual Calls
- Communication through Repeaters
- Communication through Gateways
- Selecting DMO Group Call Options
- Transmit Inhibit Mode
- Emergency Operations
- Emergency Group Call
- Making Emergency Group Calls
- Receiving Emergency Group Calls
- Non-Tactical Emergency
- Emergency Individual Calls (Private or MS-ISDN)
- Emergency Alarm
- Emergency SDS Status
- Emergency Hot Microphone
- Alternating Hot Microphone
- Silent Emergency Mode
- Invisible Emergency
- Emergency Mode by Dialing
- Disaster Alert
- Initializing Disaster Alert Calls
- Exiting Emergency Operations
- Repeater Mode
- Gateway Mode
- GPS Location Service
- Main Menu
- Scrolling through the Menu
- Menu Icons
- Messages
- Contacts
- Browser
- Security
- Setup
- Group Setup
- Favorites
- My Info
- Recent Calls
- Shortcuts
- RUI
- Networks
- Location
- Packet Data
- Features
- Private Call
- Radio Messaging System (RMS)
- One-Touch Dial
- Talkgroup Dialing by Index
- Phone and PABX Calls
- Phone/PABX Speed Dial
- DTMF Overdial
- Short Number Dial
- Dual Control Head
- RUA/RUI
- WAP
- Call-Out
- Shadow Groups (Address Bundle)
- Appendix A: Tones
- Appendix B: LED Indications
- Appendix C: Troubleshooting
• Secondary — for entering alphanumeric characters (this mode is optional and you have to
add it to the list). It is convenient when you use one language, and sometimes wish to switch
to another one.
NOTICE: In the text entry screen, you can also press # key repeatedly to toggle through
the entry modes.
Selecting Text Entry Methods and Languages
Prerequisites: Your radio displays the text entry screen.
Procedure:
1 Press MENU → Entry Setup.
2 Select one of the following:
• TAP — Enter letters, numbers, and symbols by pressing an alphanumeric key one or more
times.
• iTAP — Let the radio predict each word as you press an alphanumeric key.
NOTICE: You can use these methods in the languages programmed in the radio.
Text Entry Icons
In the text entry screen, icons tell you which text entry mode and method you are using. A character
counter displayed on the text entry icon, indicates the amount of characters that can be entered.
Press the # key to toggle through the text entry modes.
Table 12: Text Entry Screen Icons
Primary Icon Secondary Icons Description
TAP — no capitals
TAP — capitalise first letter only
TAP — all capitals
iTAP — no capitals
iTap — capitalise first letter only
iTap — all capitals
Numeric Icon Description
Enter numbers.
Symbolic Icon Description
Table continued…
Chapter 2: Getting Started
42 Send Feedback