User Manual

Appendix C
Troubleshooting
Your radio displays the following messages:
Table 27: Displayed Messages
Message Message Description
...-Received Call received but not answered, or rejected.
Attachment Failed Your radio could not perform talkgroup attachment. It keeps on
trying. If it does not succeed, try another talkgroup.
Authenticate Failure Your radio could not register on an authenticated system (for
example, the Authentication Key is incorrect, or authentication
is disabled).
Call Cancelled You have canceled the call.
Call Ended
• Faulty channel. Please try later.
• You have ended the call.
Call Forwarding The radio you are trying to call is not available and the call is
being forwarded to another radio.
Call Modified The call you are participating in has been modified.
Call Preempted Channel being used for priority.
Decryption Failed: An error occurred while decrypting a message or call.
Emergency In Use
Wait For Mic
The Hot Microphone feature is active, but the channel transmit
grant has been given to another Emergency call on the same
talkgroup. Your radio microphone is not active during this time,
but it automatically tries to regain talk permit after a predeter-
mined time.
Emgcy Mic Ended The Hot Microphone timer automatically expired, or you press-
ed the PTT button to cancel the Hot Microphone feature.
Emergency Mic On The Hot Microphone feature is active, and your radio is auto-
matically transmitting hands free emergency audio.
Empty Entry The speed number you dialed does not exist, or the number
exists but the group is non-selectable.
Faulty Unit
Error
Self-test failed. An operational fault has been detected with
your radio. Record the error number. Turn your radio off and
contact service.
Gateway available Your radio has connected to a gateway.
Gateway not available Your radio cannot connect to a gateway, or connection has
been lost.
This group already exists The group you are attempting to add exists in the My Groups
folder.
Table continued…
Troubleshooting
Send Feedback 135