User Manual

NOTICE: Your service provider sets the priority of the message.
• Push Message
- High — animation and the icon (blinking) are displayed with the New WAP Message tone.
- Medium — animation and the icon are displayed with the New WAP Message tone.
- Low — icon is displayed with the New WAP Message tone.
- Delete — available only if you are is in WAP Box, the text WAP Message deleted remotely is
displayed, otherwise there is no indication.
NOTICE: Animation is not displayed if you are in a call, or in Emergency Mode, or in Call
Out, or in message editor, or PIN lock state, or switching to DMO.
• Load Push Message
- High — browser opens to the user with the New WAP Message tone.
- Low — the icon is displayed with the New WAP Message tone.
NOTICE: Browser does not open if you are in a call, or in Emergency Mode, or in Call Out, or in
message editor, or PIN lock state, or switching to DMO.
Viewing WAP Messages
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → WAP Box.
3 Select the required message.
4 Select Go to to view the message in the browser.
Call-Out
This feature allows you to receive Call-Out alerts. On receiving the Call-Out messages, the radio
interrupts current services and attends to the Call-Out alert without any further delay. After call-out alert
has been cleared, the radio exits Call-Out mode and reverts to normal mode. During Call-Out mode
you are only able to receive Emergency Calls.
NOTICE: To read an entire Call-Out message, scroll down the screen by pressing the down
NAVIGATION key. The length of the message is indicated by the vertical red bar on the left of the
screen.
Figure 5: Call-Out Message
NOTICE: This is a selling feature.
Chapter 6: Features
Send Feedback 127